Beaming White Premium Teeth Whitening Kit is an innovative dental whitening package with LED light that is suitable for home application and is closer to professional bleaching in a dentist. Thanks to the individual buses and the strong formula combined with the LED light from the lamp (included in the package) teeth restore the whiteness and shine with up to a few shades, with just a few applications of 20-30 minutes a day. The products are clinically tested and recommended by the dentists worldwide. Do not contain peroxide. The product is added and a luxurious non-slip to store them. The package contains: – 1pcs. XL Sprinkle 10ml. with a bleaching gel – sufficient for 12-14 applications – 1pcs. Activating spray – 1 K-T-activating beams for bleaching agent 1pcs. LED lamp for excellent results – 1pcs. Box for storing whitening rails – detailed instructions for proper application in Bulgarian.
The product is for outdoor use only; Do not have direct contact with eyes; Keep indoors, away from direct sunlight and children's access; Do not use after expiration date; Beaming White Promotive offers that are updated monthly and visit the Section News where they are published familiar with the prices and conditions of the current;
Beaming White Premium Package for Domestic Teeth Whitening with LED Light. - Before bleaching, wash your teeth well and clean the intersight spaces with a thread. 1. Prepare the buses by boiling water in a suitable container. After boiling it to cool for 1 min; - Take one of the bars and dip into the water for 1-3 seconds (you have to soften) by holding it for the handle. Important information :: Excessive stay in hot water will deform the bars; - Place the bar in the mouth on top or bottom jaws and bite. At the same time, press the bar on the front of the teeth with your fingers, and from the back with a tongue to shape the bar in their teeth. Hold it in your mouth until it cools. Repeat the procedure and the other bus for the other jaw. Shaping the bars on your teeth is done only once. In the following whitening sessions, you will not have to make these steps again; - After completing the shaping of the bus, cut off their handles so that you can freely stand with a closed mouth upon placed bars; - Make sure the silicone shins are clean and dry before placing the bleaching gel in them. Moisture reduces the effect of bleaching gel and aggravates the final result. Apply a strip from the bleaching gel on the front side of the bus and remove so that when placing the gel is in contact with the front surface of the teeth. Do not put too much gel in the bars. The gel is not necessary to go out of the bars in a position. Each bus requires to put less than 1 ml. a bleaching gel for one dental arc. Place an analogous quantity in the second bus. Save the subsequent recovery syringe while the quantity was exhausted; - Get the test spray and spray your toothbrush 1-2 times and spread onto the front of the teeth for 60sec. Do not rinse, just spit the mix of foam and saliva; - Immediately after performing step 6, place the splints with a whitening gel on the teeth and keep them still. If a whitening gel came out on the periphery of the bus, remove it from gums with gauze or cotton swab; - Take the Bleaching apparatus with LED light. Open the cover on the back of the appliance, remove the two batteries and remove the plastic protective plate below them. Replace the batteries and close the cover. Position the appliance so as to be as close as possible to the teeth, the transparent plastic part of the appliance to be between the bars and the inside of the top and bottom; - Start the Bleaching apparatus with LED light and hold the silicone bus in your mouth for 30-35 minutes; - After completion of each procedure, turn off the appliance, remove the bars and rinse the teeth with water. Make sure you have removed the gel entirely. Wash the shines with a toothbrush under cold water and dry them. Dial them in the shin storage box available in your package; - Do not consume food and beverages (excluding water) for 60 min. after the application.