$131.29
Easy MateWeight: 0.33kg
SKU: 7815EASYMATE GCU BLOOD Glucose Cholesterol Uric Acid Monitor is a medical device, electronic panel without coding for blood glucose monitoring, uric acid and cholesterol from a finger sample of capillary blood. Easy Meet is a multifunctional monitoring system by quantitative measurement of blood sugar, cholesterol and uric acid from a capillary blood sample taken from the finger. It features a large LCD display to clearly read the results. With memory function to maintain the results of the measurements made, with the time and time of the analysis. Stores the data from the glucose -200 measurements; cholesterol -50 results; Uric acid -50 results. Obscode light and convenient for use, even when you are the deposit. Turn off automatically after 30 seconds. The apparatus is offered together a lancezer, lancet (25 pcs), battery aa (2 pcs). Easymate is in a glucose test packet – 10 pcs., For cholesterol – 2 pcs. and for uric acid – 10 pcs.
Features of Easymate GCU Biochemical Analyzer for Blood Sugar Monitoring, Cholesterol and Uric acid. Features: Display: LCD 35 x 45 mm Type of blood sample: capillary blood Save the results of measurements with a date and time of analysis Weight: 60 g / no batteries / Dimensions: 90 x 66 x 22 mm; Batteries: alkaline 1.5 V (AAA) - 2 pcs. Characteristics of analyzes: Glucose: Scope of measurement: 1.1 to 33.3 mmol / l 10 seconds test time Memory: 200 results with date and time Amount of blood to account for a minimum of 4μl Cholesterol: Scope of measurement: from 02.06-10.04 mmol / l 150 seconds test time Memory: 50 results with date and time Amount of blood to account for a minimum of 15μl Uric acid: Measurement range: 179-1190 mmol / l 20 second test time Memory: 50 results with date and time Amount of blood to account for a minimum of 4μl
EasyMate GCU Biochemical analyzer for blood sugar monitoring, cholesterol and uric acid. Working with the prick Unscrew the top of the device. Place the lancet and remove your cap. Put back top and turn. Adjust the depth of prick depending on the character of the skin. Pull the back of the prick to load. The pruning device is ready for operation. Place on the finger. Press the trigger. To remove the needle used, unscrew the device and release the slider Release the needle used. Measurement of an indicator Select an indicator you will measure and place the corresponding chip in this place on the back panel of the camera. Upon initial use, as well as once a week thereafter - the apparatus is calibrated with the calibration chip / yellow /. Test-tape is automatically activated. Place the finger prick and press the trigger. Remove the first drop and the second place on the test strip / from the side slot. The amount of blood required to measure cholesterol is at least 15 L or 0.5 cm in diameter - as shown in the foil of the display /. The apparatus makes a measurement and the result appears on the display. The measurement time for each indicator is different. The result is automatically saved in the camera's memory.
Read the user guide before use; Do not wet and immerse the camera in liquids; Keep out of strikes; Store it at -10 ° C to + 60 ° C at a relative humidity of 95%; Do not store in kitchens, bathrooms or other rooms with high humidity; Keep out of water; Do not use for cleaning household preparations and glassware; Do not disassemble the apparatus; Do not spray any cleaning preparations directly on the apparatus; Do not wet the chip slots and test bar!