$73.39
UnimarkWeight: 0.49kg
SKU: 21832Unimark BP 1209 is a digital blood pressure measurement apparatus by placing a biceps. The apparatus is fully automated, making it extremely convenient for self-measurement of blood pressure. It has a large display showing blood pressure and pulse. There is also the ability to power the Unimark BP 1209 adapter extremely convenient for self-measurement of biceps. Blood Performer BP 1209 is available in a package with a convenient storage bag.
Specifications Name - automatic blood pressure measurement apparatus; Model - BP-1209; Display - digital display liquid crystals; Dimensions 62.7 mm x 46.4 mm; Method of measurement - oscillometric method; Scope of measurement: Pressure - 0 mm - 300 mm; Pulse - 30 to 180 beats per minute; Measurement accuracy: Pressure - ± 3 mmd; Pulse - ± 5%; Pumping of the cuff - automatically; Memory data - 120 records; Functions: Notification of exhausted batteries; Automatic shutdown. Source of power supply - 4 AA batteries or AC adapter (not contained in the package); Battery life - approximately 2 months at least 3 measurements daily; Single weight - approximately 405 g (excluding batteries); Dimensions - approximately 134 x 99 x 66 mm (length / width / height); Cuff lap - 22.0 cm - 36.0 cm; Terms of operation: Temperature - from 5 ° C to 40 ° C; Humidity - & lt; 85% RH; Pressure - atmospheric pressure; Storage conditions: Temperature - from -10 ° C to 55 ° C; Humidity- Pressure - 525 mm - 795 mmnd; Classification - Equipment with internal power, type B.
Placement of cuff 1. Place the plug on the air duct in the hole located on the left side of the apparatus. 2. Follow the end of the cuff in the metal ring, with the country with Velcro points out. 3. Secure the cuff to about 1-2 cm above the elbow fold. For the best results, place the naked handcuffed and hold it at the level of the heart as shown in the illustration. Measurement 1. Inclusion Press and hold the Start / Stop button until a beep sounds. The LCD display will light up for a second. Prolonged sound shows that the device is ready for measurement. Note: The device will not work if there is a residual air from previous cuff measurement. The screen will blink a downward arrow symbol until the device automatically normalizes the pressure. 2. Pumping the cuff First, it is pumped to a 190 mmHg pressure. If your systolic pressure is over 190 mmHg, the device will automatically pump further to the required value. 3. Measurement After the particle is pumped, the air will slowly allocate until it reaches the required pressure. At the same time, a blinking sign of the heart will appear on the display showing that the measurement has begun. Note: Stay allotted during the measurement. Don't talk or move your body. 4. Display the result on the display When measurement is complete, the device will play three short beeps. The measurements for systolic and diastolic blood pressure are displayed on the display. Off You can turn off the camera at any time using the Start / Stop button. The apparatus shuts down automatically if more than 3 minutes is not used.
Before using for the first time, read the user manual carefully; Avoid dropping, hitting or throwing the apparatus; Avoid extreme temperatures; Do not use the outdoor unit; When cleaning the apparatus, use soft tissue and gently rubbed with a soft detergent; Use a damp cloth to remove the pollution and excess detergent; Cleaning the cuff not melee the cuff in water! Use a small amount of cleansing alcohol on a soft cloth to clean the cuff; Use a moistened cloth to wash away; Allow the cuff to dry independently at room temperature; Do not use gasoline, diluents or similar solutions; Remove the batteries when you will not use the apparatus for a longer period; Do not disassemble the apparatus and do not try to fix it yourself; Service prophylaxis of the apparatus every 2 years is recommended;