Clear Simple Pregnancy Test Strips are easy-to-use test strips for detecting pregnancy, designed for use at home.
They have a sensitivity of 20 mIU/ml and are intended for use no earlier than 4 days before a missed period.
Each of the three strips in the Set quickly and accurately, in just 5 minutes, reports the result with over 99% accuracy.
- Early pregnancy detection, the test measures the presence of the hormone chorionic gonadotropin (HCG) in human urine
- In a woman who is not pregnant, the hormone hCG (Human Chorionic Gonadotropin) is normally present in urine at very low levels (around 5mIU/ml)
- When pregnant, a woman's body produces significant amounts of this hormone
- By the first day of a missed period, this hormone should have reached levels that be detected by any of the Clear Simple tests
- Clear&Simple strips are used directly under the urine stream, making the test extremely easy and convenient to use
By the first day of a missed period, this hormone should have reached levels that can be detected by any of the Clear Simple tests.
Clear&Simple strips are used directly under the urine stream, making the test extremely easy and convenient to use.
Recommended for: General use
Key benefits: Protection, comfort, durability

Weight: 0.14kg

Clear Simple Pregnancy Test Strips Pregnancy Test Strips x3. Each Set of Clear Simple Pregnancy Test Strips contains 3 test strips

Clear Simple Pregnancy Test Strips Pregnancy Test Strips x3 pcs Directions for use: The urine sample for testing should be collected in a clean, dry container. It is recommended that this be done in the morning, when urine contains the highest levels of HCG for the day, but samples can be used at any time of day. How to test: Open the sealed bag and remove the strip. Place the test strip vertically (upright) in the urine sample, making sure that the arrows are pointing downwards. Do not immerse above the maximum level line (marked with arrows) on the test strip. Leave the strip in the urine for at least 8 seconds (10 seconds is recommended). Remove the pregnancy test and place it on a dry, flat (non-absorbent) surface. Wait for the colored bands to appear; depending on the concentration of HCG, the results can be seen after 40 seconds. However, to confirm a negative result, the full reaction time (5 minutes) is required. Interpreting the result: Positive result - If two colored lines appear on the test strip, you are pregnant. One line may appear lighter than the other, but both will be of equal thickness. A faint line is more likely to occur when you test early and your hCG levels are low. Negative result - If only one colored line appears on the test strip, this is a negative result and you are not pregnant, or you may have tested too early. If you are unsure, repeat the test after 48 hours with a new test strip. Invalid result - If no lines appear on the test strip or if only the test line appears, the test is not working properly and is invalid. This is usually because the strip is not wet enough. Repeat the test with a new strip, making sure it is properly immersed in the urine sample for a full 10 seconds.

For single external use only; Read the instructions for use carefully; Store at a temperature between 39.2°F (4°C) and 86°F (30°C); Do not freeze; The test strip should not be used after the date marked on the package; Keep out of reach of children;