Unimark BP 1209 is a digital blood pressure monitor that measures blood pressure by placing a cuff on the upper arm.
The device is fully automated, making it extremely convenient for self-measurement of blood pressure.
It has a large display showing blood pressure and pulse.
- It also be powered by an adapter
- The Unimark BP 1209 is extremely convenient self-measurement of blood pressure with a cuff on the biceps
- The Unimark BP 1209 blood pressure monitor comes in a Set with a convenient storage bag
The Unimark BP 1209 is extremely convenient for self-measurement of blood pressure with a cuff on the biceps.
The Unimark BP 1209 blood pressure monitor comes in a Set with a convenient storage bag.
Recommended for: General use
Key benefits: Protection, comfort, durability

Weight: 0.49kg

Cuff, Air Tube, Connector, Velcro Fastener, Nylon Fabric

Putting on the cuff 1. Securely insert the air tube plug into the opening on the left side of the device. 2. Tuck the end of the cuff into the metal ring with the Velcro side facing out. 3. Secure the cuff about 1-2 cm above the elbow bend. For best results, place the cuff on your bare arm and hold it at heart level, as shown in the illustration. Measurement 1. Turning on Press and hold the "START/STOP" button until you hear a beep. The LCD display will light up for a second. A continuous tone indicates that the device is ready to measure. Note: The device will not work if there is residual air from previous measurements in the cuff. A downward arrow symbol will flash on the screen while the device automatically normalizes the pressure. 2. Inflating the cuff First, inflate to a pressure of 190 mmHg. If your systolic pressure is above 190 mmHg, the device will automatically inflate further to the required value. 3. Measurement After inflating the cuff, the air will slowly deflate until it reaches the required pressure. At the same time, a flashing heart symbol will appear on the display, indicating that the measurement has started. Note: Stay relaxed during the measurement. Do not talk or move your body. 4. Displaying the result on the display When the measurement is complete, the device will emit three short beeps. The display shows the systolic and diastolic blood pressure measurements. Turning off You can turn off the device at any time using the "START/STOP" button. The device turns off automatically if it has not been used for more than 3 minutes.

Before using for the first time, read the user manual carefully; Avoid dropping, hitting, or throwing the device; Avoid extreme temperatures; Do not use the device outdoors; When cleaning the device, use a soft cloth and gently wipe with a mild detergent; Use a damp cloth to remove dirt and excess detergent; Cleaning the cuff Do not immerse the cuff in water! Use a small amount of cleaning alcohol on a soft cloth to clean the cuff; Use a damp cloth to wipe it clean; Allow the cuff to dry naturally at room temperature; Do not use gasoline, solvents, or similar solutions; Remove the batteries when you are not going to use the device for a long period of time; Do not disassemble the device or attempt to repair it yourself; It is recommended to have the device serviced every 2 years;