Seni Standard Air are universal adult diapers in size S for people with moderate to severe incontinence.
Seni Standard Air universal adult diapers are suitable for people with moderate to severe incontinence.
They have side wings made of breathable non-woven material and can be used for both urinary and fecal incontinence.
- They be used by both active people and people with limited mobility
- They are also suitable children with an approximate waist size of 55-80 cm
- Protection
- Comfort
- Durability
They can be used by both active people and people with limited mobility.
They are also suitable for children with an approximate waist size of 55-80 cm.
Recommended for: Children
Key benefits: Protection, comfort, durability

Weight: 2.51kg

Seni Standard Air are universal adult diapers in size S for people with moderate to severe incontinence. Seni Standard Air universal adult diapers are suitable for people with moderate to severe incontinence. They have side wings made of breathable non-woven material and can be used for both urinary and fecal incontinence. They can be used by both active people and people with limited mobility. They are also suitable for children with an approximate waist size of 55-80 cm. Putting on a diaper while standing - independently or with the help of a caregiver. 1. Insert the diaper between the legs, Holding the product in a boat shape. 2. Adjust the diaper at the front and back so that it fits snugly against the body. 3. Secure the diapers with elastic adhesive strips, Starting from the bottom and sticking them diagonally upwards. After securing the bottom, Attach the top adhesive strips, Adjusting the diaper to the waist. After putting on the diaper, Make sure it fits well and does not press against the body

Putting on a diaper while standing - independently or with the help of a caregiver. 1. Insert the diaper between the legs, holding the product in a boat shape. 2. Adjust the diaper at the front and back so that it fits snugly against the body. 3. Secure the diapers with elastic adhesive strips, starting from the bottom and sticking them diagonally upwards. After securing the bottom, attach the top adhesive strips, adjusting the diaper to the waist. After putting on the diaper, make sure it fits well and does not press against the body, and that the side restraints are not folded. 4. Fold the used diaper and throw it in the trash. Do not flush the used product down the toilet. Putting a diaper on a bedridden patient. 1. Stand at the edge of the bed and bend one leg at the knee. (Note: if you are on the patient's right side, bend the left leg; if you are on the left side, bend the right leg). 2. Turn the patient onto one side and, after taking care of their hygiene, place the diaper under them. (Note: Do not forget to spread the wings of the diaper - this will allow you to pull the diaper after placing the patient on their back.) 3. Make sure the wetness indicator is level with the spine. Place the patient on their back, straighten their legs, and pull the wings of the diaper. Pull the front of the product, then secure it. Use the elastic combo strips to secure the diaper; start with the bottom strips, sticking them down gently. Then secure the top strips at the waist. Make sure the diapers are well secured to the body and the side barriers are not folded. 4. Roll up the used diaper and throw it in the trash. Do not flush the used product down the toilet.

The product is for external use only; Store in a clean place out of reach of children;