The Nuk bath thermometer is designed to measure the temperature of the water and makes bath time fun.
The product is for home use only.
It is accurate, reliable, hygienic, easy to read, and safe to use.
- The correct temperature a baby's bath should be around 37°C
- The thermometer scale is easy to read
- No mercury is used
- The thermometer is made of unbreakable material
- It is filled with a natural and completely harmless measuring fluid based on rapeseed oil
With it, hair can determine whether the water is at the right temperature, and then hair can begin the bathing ritual.
Recommended for: General use
Key benefits: Oil control

Weight: 0.14kg

Nuk bath thermometer is designed to measure the temperature of the water and makes bath time fun. The product is for home use only. It is accurate, Reliable, Hygienic, Easy to read, Safe to use. The correct temperature for a baby's bath should be around 37°C. The thermometer scale is easy to read. No mercury is used. The thermometer is made of unbreakable material. It is filled with a natural and completely harmless measuring fluid based on rapeseed oil. With it, You can determine whether the water is at the right temperature, Then you can begin the bathing ritual

The thermometer has a built-in switch that reacts to vibration. To turn it on, tap it lightly with your palm. The room temperature will be displayed on the screen. Stir the water in the tub to even out the temperature. Place the thermometer in the tub with the display facing up and read the temperature. We recommend a maximum water temperature of 37 degrees Celsius. If the temperature is higher than 39 degrees Celsius, the display will flash red and signal hot water by displaying HOT. If the temperature is below 32 degrees Celsius, the display will show COLD. Monitor the temperature while bathing. After bathing, remove the thermometer and dry it with a towel. If necessary, you can wash the thermometer with soap. The thermometer switches off automatically after 1 hour. Store the thermometer in a dry place after use. Replacing the battery Important! The thermometer should only be immersed in water after strictly following the instructions for changing the battery. The thermometer only works with a CR2032 battery. It needs to be replaced when the display readings fade. The battery must be replaced by an adult. Important! The thermometer must be completely dry before replacing the battery. Turn the thermometer upside down so that you can see the battery compartment. Use a fork to open the battery compartment by turning it counterclockwise in the direction of OPEN. Over time, the cover may stick, so use a thin object to pry it open. Remove the old battery. Insert a new battery, making sure the polarity is correct. Check that the seal is correctly positioned and intact. Tighten the cover securely using a fork in a clockwise direction.

Do not sterilize or boil the thermometer to avoid damage; Maximum cleaning temperature - up to 140°F (60°C); Do not open the product except to change the battery; Do not expose the thermometer to direct sunlight; Do not use abrasives to clean the product; Do not dispose of the product with household waste; Use only a CR2032 battery to avoid damaging the product; To prevent explosion, do not recharge or heat the battery; Do not open the battery; Remove the battery if it needs to be replaced or if the thermometer is not used for a long period of time to prevent leakage and damage to the product; Ensure that the water temperature is uniform throughout the bath to avoid the risk of burns; Do not leave your child unattended in the bath; Use the thermometer only under adult supervision. Keep the battery, battery cover, and seal out of the reach of children—risk of injury and swallowing small parts. If the battery is swallowed, seek medical attention immediately. If the thermometer is broken or damaged, do not use it to prevent injury or swallowing of small parts;