The Lanaform Pulse Oximeter S1 is a non-invasive measuring device used to determine the level of oxygen saturation in the blood (SpO2) by testing the percentage of oxygen-saturated hemoglobin and measuring the heart rate.
This method has been used for over 20 years and has become a standard test in medical practice to ensure that oxygen levels are within normal limits and to prevent breathing difficulties.
Blood oxygen saturation of less than 90% in arterial blood can be considered dangerous.
- The normal value is 100% under normal atmospheric conditions
- The Lanaform oximeter has the advantage of being compact, energy efficient, easy to store, use, and transport
- The device's display automatically rotate in four directions, depending on the parameters, offering six different views
- Recommended use in: Heart attacks, Asthma, Chronic lung disease, Sleep apnea
The device's display can automatically rotate in four directions, depending on the parameters, offering six different views.
Recommended for use in: Heart attacks, Asthma, Chronic lung disease, Sleep apnea.
Recommended for: General use
Key benefits: Protection, comfort, durability

Weight: 0.49kg

The Lanaform Pulse Oximeter S1 is a non-invasive measuring device used to determine the level of oxygen saturation in the blood (SpO2) by testing the percentage of oxygen-saturated hemoglobin and measuring the heart rate. This method has been used for over 20 years and has become a standard test in medical practice to ensure that oxygen levels are within normal limits and to prevent breathing difficulties. Blood oxygen saturation of less than 90% in arterial blood can be considered dangerous. The normal value is 100% under normal atmospheric conditions. The Lanaform oximeter has the advantage of being compact, Energy efficient, Easy to store, Use, And transport. The device's display can automatically rotate in four directions, Depending on the parameters

Lanaform Pulse Oximeter S1 for measuring pulse and blood oxygen saturation. Instructions for use 1. Place your finger in the device with your nail facing up, then release the clips. For optimal results, please ensure that your finger is centered on the finger guide and hold the oximeter against your heart or chest. 2. Your finger should not shake while the oximeter is operating. It is recommended that you do not move while it is in operation. 3. The corresponding values are shown on the display. Low battery alarm When the battery is at its lowest level, the symbol indicating that the battery needs to be recharged is displayed on the OLED screen. Heart rate alarm The pulse alarm is triggered by default when the heart rate is higher than 110BPM or lower than 40BPM. The BPM symbol then flashes on the OLED screen. If oxygen saturation is below 85%, the symbol also flashes on the screen.

Read before use;