Unimark Self-taking Blood Pressure Kit Classic HBPK-A is a mechanical device for self-measurement of blood pressure.
Reliable and convenient, Unimark Classic is manufactured using the latest technology.
This is a classic blood pressure measuring device, designed specifically for more accurate self-measurement of blood pressure.
- Unimark Classic is a High-Quality device with a precise and stylish manometer
- It has a large scale easy reading of values
- Comes in a Set with a practical attached stethoscope
- It also has a fine dust filter
- It measures blood pressure using the Korotkoff method, considered the gold standard in global practice
Color: black.
Recommended for: General use
Key benefits: Protection, comfort, durability

Weight: 0.49kg

Convenient, A large scale for easy reading of values, Precise and stylish pressure gauge, Convenient attached stethoscope, Fine dust filter

Putting on the cuff and taking the measurement: 1. Connect the air tubes to the pressure gauge and the stethoscope head. 2. Place the cuff on the left arm so that the air tube runs through the middle of the inner side of the arm (above the brachial artery). 3. Wrap the cuff around the arm so that it is neither too tight nor too loose, and its lower edge (where the stethoscope head is attached) is 1-2 cm above the elbow joint on the inner side. 4. Carefully place the earpcs of the stethoscope in your ears. 5. Tighten the pump valve clockwise and create pressure in the cuff until the scale shows 180-200 mm. If you hear a pulse in the earpcs, pump until no sounds are heard. 6. Slowly turn the pump valve counterclockwise so that the pressure gauge reading decreases by 2-3 divisions per second. 7. Using the stethoscope, listen for the pulse in the brachial artery. When the pressure in the cuff equals the systolic pressure, you will hear a clear sound from the heartbeat. When the sound subsides (disappears), the pressure matches the diastolic pressure. The sound you hear changes in intensity and goes through 5 phases. - initial beats (systolic pressure) - initial beats (systolic pressure) - the sound intensity increases - the sound reaches its maximum intensity - sound reaches maximum intensity - the sound weakens - the sound weakens - - it stops being heard (diastolic pressure) 8. 8. Release the air and unroll the cuff.

Please read the manual carefully before using the device; The device contains a precision clockwork mechanism; Do not subject it to impact or shock! Clean the device with a slightly damp cloth; Do not wash the cuff and do not use chemicals when cleaning it; Never use alcohol or gasoline for cleaning; Do not use any tools to open the device and do not repair anything in it; If you have a problem, please contact an authorized service center;