Clear Ovu Test is a quick and easy-to-use one-step LH ovulation test.
It is designed to determine when the level of luteinizing hormone (LH) is at its peak and, therefore, when hair are likely to ovulate.
In order to determine when to start testing, hair must first determine the length of hair menstrual cycle.
- This is the number of days from the first day of your menstrual bleeding to the day before the start of your next menstrual bleeding
- Please refer to the table below to determine when you should start testing
- If your cycle is shorter than 21 days or longer than 38 days, please consult your doctor
- If you do not know the length of your cycle, you start testing on the 11th day after your period, as the average cycle length is 28 days
- Take one test every day five days or until the LH surge is detected
Cycle length 21 days 22 days 23 days 24 days 25 days 26 days 27 days 28 days 29 days 30 days 31 days 32 days 33 days 34 days 35 days 36 days 37 days 38 days Start testing on day 6 day 6 day 7-iдeн7-iдeн8-iдeн9-iдeн10-iдeн11-iдeн12-iдeн13-iдeн14-iдeн15-iдeн16-iдeн17-iдeн18-iдeн19-iдeн20-iдeн21-iдeн.
Recommended for: General use
Key benefits: Protection, comfort, durability

Weight: 0.14kg

1 ovulation test, A urine cup

Clear Ovu Test Rapid ovulation test. Urine collection: 1. Do not use your first morning urine, as LH is synthesized in your body early in the morning. The increase in LH will only show up in your urine later in the day. 2. The best time to collect urine is between 10 a.m. and 8 p.m. 3. Collect urine at the same time every day. 4. Reduce your fluid intake about 2 hours before collecting your urine, as a diluted urine sample may prevent detection of the LH surge. Test procedure: 1. Allow the sealed foil pouch, urine sample, and control solution to reach room temperature. (18-30°C) 2. Remove the LH cassette from the sealed foil pouch. 3. Draw the urine sample with the pipette provided. 4. Hold the pipette vertically above the test cassette at a height of about 1-2 cm above the sample addition window. Add 5 drops of urine to this window. 5. Place the test device on a flat surface with the result window facing up. Wait for the colored lines to appear. Depending on the concentration of LH in the sample, positive results can be observed after at least 40 seconds. However, to confirm negative results, a full reaction time of 10 minutes is recommended. Do not read the results after more than 30 minutes. Interpretation of results: - No LH surge: only one colored band appears in the control region (C) or the test band (T) appears but is lighter than the control band. This means that there is no LH surge. - LH surge: two colored lines are visible, and the test line (T) is equal in intensity or darker than the control line (C). This means that you will probably ovulate in the next 24-48 hours. If you are trying to conceive, the best time to have intercourse is after 2 hours, but before 48 hours. - Invalid: no visible colored lines at all. Repeat the test with a new test device.

For single external use only; Read the instructions for use carefully; Store at a temperature between 39.2°F (4°C) and 86°F (30°C); Do not freeze; The test strip should not be used after the date marked on the package; Keep out of reach of children